Preventive Maintenance
With regular maintenance you will prevent small problems from becoming big problems and ensure optimal performance of your comfort system. We also offer annual service agreements, which can reduce the cost of a Performance Tune-Up.
Regular maintenance will:
- Provide longer lasting equipment
- Reduce utility bills
- Reduce repairs
- Provide a more comfortable indoor environment
- Protect your investment
What we do during a Performance Tune-Up:
Air Conditioning Maintenance Checklist
- Inspect Air Filter
- Visually Inspect Indoor Unit
- Visually Inspect Outdoor Unit
- Level Outdoor Unit
- Test Run System
- Check for Abnormal Noise
- Inspect Condensing Coil
- Inspect Pressure Limit Switches
- Check Condensing Fan
- Check Condensing Fan Motor
- Check AMP Draw
- Check Pressures
- Check Capacitor for Leaking, Swelling
- Measure Cap Size and Act Reading
- Check Contactor for Burning, Arcing, Bug Debris, Loose Connections
- Clean Debris Out of Outdoor Unit
- Check Condition of Grills and Fins
- Wash Coil If Needed and Recheck
- Measure Pressure
Gas Furnace Maintenance Checklist
- Test Run, Listen for Noise
- Measure Temp Rise Specifications
- Test Flame Sensor
- Inspect Draft Blower & Lube
- Measure PRI PSI Switch
- Measure SEC PSI Switch
- Check Draft Safeguard
- Check High Limit Switch
- Check Roll Out Switch/s
- Check Auxiliary Limit
- Check Fan/Limit Control
- Inspect Igniter
- Inspect Wiring/Controls
- Inspect Pilot
- Inspect Thermocouple
- Clean Burners
- Visually Inspect Heat Exchanger
- Check for Water Leaks or Cracked Parts
- Check Condensate Drain System
- Check Blower Motor. Lube if Possible
- Inspect Blower Wheel
- Clean Flame Sensor and Retest
- Inspect/Replace Air Filter
- Inspect/Replace Humidifier Pad
- Check Thermostat/Batteries Check/Change
- Check UV Lamp or Other IAQ Accys